Pricing Guide: Engine Packages | Drives | Quicksilver Props
Reference Guide: Mercury Chemicals Aftermarket Equivalents
Item |
Part Number |
Picture |
Required for |
Engine Oil |
|||
Synthetic Blend Oil (Quart) |
92-8M0078629 | 4-Cycle Engines. | |
SAE 25W40 Oil (Quart) |
92-8M0078627 | 4-Cycle Engines | |
Synthetic Blend Oil (Gallon) |
92-8M0078630 | 4-Cycle Engines | |
SAE 25W40 Oil (Gallon) |
92-8M0078628 | 4-Cycle Engines | |
2-Stroke Outboard Oil |
|||
Premium TWC-3® |
2-Cycle Outboards (except Optimax & DFI) | ||
92-858020Q01 | Pint | ||
92-858021Q01 | Quart | ||
92-858022Q01 | Gallon | ||
92-858023Q01 | 2.5 Gallon | ||
92-858024Q01 | 55 Gallon | *Special Order, Minimum of 2 units, freight shipping only | |
Premium Plus TWC-3® |
2-Cycle Outboards | ||
92-858025Q01 | Pint | ||
92-858026Q01 | Quart | ||
92-858027Q01 | Gallon | ||
92-858028Q01 | 2.5 Gallon | ||
92-858029Q01 | 55 Gallon | ||
Direct Injected (DI) Outboards |
Direct Injected (DI) Outboards | ||
92-858037Q01 | 4 Liter | ||
92-858038Q01 | 10 Liter | ||
92-858039Q01 | 208 Liter | ||
Stern Drive / Outdrive / Outboard Gear Lube (most sterndrives require between 2 and 4 quarts) |
|||
Quicksilver Premium Gear Lube |
92-802844Q 1 | 10oz | For use with all outboard motors |
Quicksilver Premium Gear Lube |
92-858058Q01 | 32oz | For use with all outboard motors Also available with outboard pump (3/8"-16 fitting) 91-802891Q-3 |
Quicksilver Premium Gear Lube |
92-858059Q01 | 2.5 Gallon | For use with all outboard motors |
Quicksilver High Performance Gear Lube |
92-802851Q1 | 10oz | For use with all sterndrives, outdrives and outboard models |
Quicksilver High Performance Gear Lube |
92-858064Q01 | 32oz | For use with all sterndrives, outdrives and outboard models Also available with pump (3/8"-16 fitting) 91-802891Q-4 |
Quicksilver High Performance Gear Lube |
92-858065Q01 | 2.5 Gallon | For use with all sterndrives, outdrives and outboard models |
Additives, Lubricants and Sealants |
|||
Perfect Seal Sealant |
92-342271 |
Image | U-Joint Bellows, Exhaust Bellows (for sealing) |
Anti-Corrosion Grease |
92-802867Q-1 | Image | U-Joints, Pivot Points, as necessary |
Power Trim and Steering Fluid |
92-802880Q-1 | Hydraulic fluid for trim and steering sytem | |
Fuel Treatment & Stabilizer |
92-858072Q01 | Used to prevent fresh fuel from undergoing degradation and oxidation. 1 oz. (30ml) treats 6 gallons (22.71L) of fuel as stabilizer. 1 oz. (30ml) treats 2 1/2 gallons (9.46L) of fuel as stabilizer. For use with 2 and 4 cycle engines. 16 fl. oz. (473ml) plastic bottle. | |
Fogging Oil |
92-802878Q56 | A blend of corrosion inhibiting additives designed to coat engine components during engine storage. and reduce the formation of surface rust. 12 oz. (340g) spray can. | |
Corrosion Guard, Spray Can, 11 oz. |
92-80287855 | Image | Engine exterior |
2-4-C Marine Lube with Teflon |
92-802859Q-1 | Image | High-quality, multipurpose lube designed to withstand extreme friction. Can use on back-to-back seals such as in the water pump base or propshaft bearing carrier. Not for needle bearings or internal engine parts. (Squeeze Tube 8 oz.) |
Engine Coupler Spline Grease |
92-802869Q-1 | Image | High quality multipurpose lube designed to withstand extreme friction for splined couplers. Not for needle bearings or internal engine parts.(Standard grease gun size, 14oz.) |
U-joint and Gimbal Bearing Grease |
92-802870Q-1 | Image | High quality multipurpose lube designed to withstand extreme friction for u-joint cross-bearings and couplers. Not for needle bearings or internal engine parts. (Standard grease gun size, 14oz.) |
Special Lube 101 |
92-802865Q02 | Image | A high quality multipurpose lube which withstands extreme friction and water resistance. Perfect for stainless steering rods and prop installation. (Squeeze Tube 8oz) |
Bellows Adhesive |
92-86166Q1 | Used to seal u-joint and exhaust bellows. (Tube 1.5oz) (adhesive) |